z

Clark Railworks OO Gauge C3022 Demountable Tank Wagon 'ADB749039', Haymarket Water Tank

z
z

Our reference: C3022

Introduction

Our Demountables are in production now, and we hope to have them available for purchase in June/July of this year, priced at £40 each. You can pre-order yours – at no upfront cost – via our website (clarkrailworks.com) or by calling us on 01756 701451.

Demountable wagons were a small but fascinating staple of the British railway scene for decades and though most famous for their association with the ‘divine medicine’ diversified into many other uses. Often requested by modellers, we’re delighted to offer them as our latest premium-quality OO Gauge product – so give in to beer pressure and order yours today!

C3022 | ADB749039 | ‘Haymarket Water Tank’

B749039 was again repurposed in the 1970s, when it became the water tank for the Cowans Sheldon Steam Crane, based at Haymarket. In 1987 it moved (with the crane) to Didcot Railway Centre for preservation. But its story doesn't end there…

Eras 5, 6, 7, 8 & Preservation

History, Info & Updates: We've made a handy blog post for this project which will give you a little bite-size history & info. To view the Demountable Project page, click the 'Demountables' tab in the top menu bar.

RRP -£40.00

Release date - June/July 2025

SPECIFICATIONS

A splash of colour brightens any railway scene, so we’ve ‘seen red’ with our first run of Demountables! But a closer look will reveal subtle differences in each model, and we’ve catered for alternative chassis designs as well as various stages in the Demountables’ diverse histories. To borrow from video game pop culture, why not ‘catch ‘em all’?

Naturally, our Demountables will feature our trademark attention to quality, with finely detailed die-cast chassis, removable loads, sprung buffers and innovative ‘ultra-flex’ bufferbeam pipes that allow them to negotiate 2nd radius curves even with tension-lock couplings attached.

And as with our Lowmacs, we’ve not forgotten finer-scale enthusiasts, as 26mm axles with plenty of ‘wiggle room’ allow for easy conversion to EM and P4 Gauges.

  • Die-cast chassis
  • Super-detailed underframe
  • Sprung buffers
  • 'Ultraflex' end pipes
  • Removable NEM coupling and pocket
  • Removable tank load with extra-fine securing chains
  • Different chassis types
  • Easy conversion to EM/P4, with 26mm axle

**The images provided are of current decorated samples and these may be subject to change.

Tip: Want to enlarge and zoom in on the pictures? Simply hover over a picture, click on it and then use the zoom symbol in the top right hand corner.

Search

z